A、Mixing Effect The standard double screws cone-shape mixer is equipped with two agitating augers, yet single(a long auger), double(two dissymmetrical augers with different length) or triple(three symmetrical screws with two long and one short) augers is adopted in fact according to the size of the device; theoretically, more angle augers there are, better the mixing effect is.

B、Cooling and heating Cool or heat the materials through feeding the cold or hot medium into the jacket which is added to the outside of the cylinder of the mixer. Pump industrial water for cooling and steam or heat oil heated by electricity for heating.

C、Liquid-adding mixing The mix of injecting liquid can be achieved by connecting the atomized spray nozzle with spray pipe which is inserted in the intermediate axle location of the mixer. With choosing the specific materials, the mix of powder and liquid can be conducted by injecting acid or alkali liquid.

D、Compression Resistance The cover of the cylinder can be made as the shape of a dome, deceasing residue to clean easily while improving compressive strength of the mixer cylinder, which should be frequently used when pressure resistance cylinder is needed.

	E、Negative Pressure Feeding The cylinder of the mixer can be made as negative pressure chamber in specific process, which breathes the dry material with good fluidity in mixing chamber for mixing using soft pipe, without residue and pollution in the feeding segment.
	F、Discharging Mode The standard device typically uses plum flower-shaped “dislocation valve” that joints closely with the bottom of long screw to decrease mix dead angle effectively with two driving methods, manual and pneumatic. It can also use butterfly valve, ball valve, star-shape material discharging device, side discharge and so on according to the user’s requirements.